SLCAB Series

Briskheat

$3.99

120V tinned copper overbraid-price per foot. Available heat outputs: 5, 8, or 10 watts/ft (10, 16, 26, or 33 watts/m). Supply voltages: 110–120VAC or 208–277VAC. Usually Ships SAME DAY!

Wattage

Overjacket

Let’s Connect

Stay up to date with industry insights, product updates, and expert advice — follow Gordo Sales on

Need Help?

Talk to our experts to help you get your project done right.

Description

Self-regulating heat trace cable for reliable pipe tracing, freeze protection, and low-temperature process maintenance—priced per foot.

We cut to length with 20 foot minimum

Self-limiting technology automatically adjusts heat output as surface temperatures change
Safe to overlap and insulate for simplified installation
Field cut-to-length and terminated; termination kits required and NOT included
No temperature controller required* for general freeze protection
Moisture, chemical, and flame resistant construction with durable metal braid options and overjackets

* If a specific process temperature is needed, a temperature controller is required.

Specifications

Continuous maintenance temperature: 150F (66C) maximum
Intermittent exposure temperature: 185F (85C) maximum; -20F (-29C) minimum
Available heat outputs: 3, 5, 8, or 10 watts/ft (10, 16, 26, or 33 watts/m)
Supply voltages: 110–120VAC or 208–277VAC
16AWG bus wires; tinned copper braid 0.003 ohms/ft (0.009 ohms/m); stainless steel braid 0.125 ohms/ft (0.410 ohms/m)
T-Rating: T6 for 3, 5, 8 watts/ft; T5 for 10 watts/ft**

** Electrical equipment T-rating codes define the maximum surface temperature that equipment will reach. Used in hazardous (classified) area applications.

Braid and Jacket Options

Metal braid: Tinned copper or stainless steel
Overjackets: Thermoplastic elastomer for weak chemical environments; fluoropolymer for strong chemical environments

Approvals

FM Approved | CSA Approved

Ordinary Locations; Hazardous (Classified) Locations: Class I, Division 2, Groups B, C, D; Class II, Division 2 (E,F,G per model); Class III, Division 2.

Approvals valid only when used with appropriate heating cable and installation accessories, and installed per all applicable instructions, codes, and regulations. 2E approved for 3 and 5 watts/ft only.

Note: Special consideration must be given for the circuit breaker due to high initial in‑rush currents.

Product Catalog Sheet

Connection Kits Catalog Sheet

Pipe Trace Application Help

Examples of Heating Cable Placement