Sale!

100 Amp 3 Pole, 120VAC holding coil mercury displacement relay 3100NO-120A-18

Original price was: $402.35.Current price is: $388.35.

100 Amp 3 Pole, 120VAC holding coil mercury displacement relay.

Usually ships SAME DAY!

Description

100 Amp 3 Pole, 120VAC holding coil mercury displacement relay

Mercury Displacement Relays are all designed and built to meet the most exacting demands of industry. They have won their high place in the electrical field by doing the tough and tricky jobs that ordinary equipment could at best do in an uncertain manner. They have proved their ability to stand up under the most adverse conditions of temperature, dust and moisture, in all types of applications. All the care required for the manufacture of high-grade instruments is used in the manufacture of the switches. All switch parts are specially cleaned, and contamination is avoided by use of tweezers, gloves, etc., when making assemblies.

Normally Open Contactors Typical Specifications:
  • Operate Time: 50 milliseconds
  • Release Time: 80 milliseconds
  • Contact Resistance:
  • 35-AMP = .003 ohm *
  • 60-AMP = .002 ohm*
  • 100-AMP = .001 ohm*
  • Dielectric Withstand: 2500 Vac Rms
  • Longevity: Millions of Cycles
  • Temperature Range: -35 degrees C to 85 degrees C
  • Coil Terminals: #6 Binding Head Screws
  • Load Terminals: Pressure Connectors for A.W.G. #4 - #14 on 35-AMP Units and A.W.G. #2 - #8 on 60-AMP Units
  • UL Listing: File #E62767 for 35 and 60-AMP N.O. Units 1-4 Poles
  • C.S.A.: File #LR41198 for 35 and 60-AMP N.O. Units (Heater Loads) 1-3 Poles
  • Auxiliary Devices for Use in Hazardous Locations. UL File #E71867 N.O. Units Approved for Class 1, Groups A, B, C and D, Division 2 Only. To Order for Hazardous Locations, Add the Suffix -X to Part Number.
* After Cycling Under Load
MERCURY TO METAL CONTACTOR:

The load terminals are isolated from each other by the glass in the hermetic seal. "The plunger assembly", which includes the ceramic insulator, the magnetic sleeve and related parts, floats on the mercury pool. When the coil is powered causing a magnetic field, the plunger assembly is pulled down into the mercury pool which is in turn displaced and moved up to make contact with the electrode, closing the circuit between the top and bottom load terminal, which is connected to the stainless steel can.

Proper Fusing is Required
While MDIs contactors handle high inrush, such as lamp loads, very well, mercury contactors are susceptible to damage by short circuit currents, and should be fused to minimize short circuit fault currents. Fast acting UL class RK-1 and class J fuses and semiconductor I2t fuses more effectively protect relays than other fuses. These are low-peak fuses designed to limit short circuit currents. Regardless, when there is a short circuit, relay operations should be closely monitored afterward because of the possibility of concealed damage that could cause the relays to behave inconsistently.

 

IMERC State Restrictions'
Due to mercury-added products being banned or phased out in some states, Gordo Sales cannot ship Mercury added products (Relays, Switches and Floats) to the following IMERC states:
Connecticut (CT), Minnesota (MN), Maine (ME), Massachusetts (MA), New Hampshire (NH), New York (NY), Rhode Island (RI), or Vermont (VT)

These states belong to the Interstate Mercury Education and Reduction Clearinghouse (IMERC) group, which have these restrictions.

Exemptions are currently being applied for in cases where Mercury Relays and Switches are being used to replace relays and switches in equipment originally manufactured with Mercury Relays and Switches. But, currently, we cannot ship into these states.

Amps Amps Amps Amps
 Type of Loads  Voltage  35NO 35NO(H) 60NO 60NO(H)
 A.C. Resistive 240V 35 35 60 60
480V 35 35 60 60
600V 35 48
 A.C. Inductive P.F .4 or greater 120V 25 30
240V 15 20
 General Purpose P.F. .7 or greater 240V 60
480V 60
 D.C Resistive heating 48V 35 60
125V 16 40
250V 12 20
 Tungsten lamp 120V 35 35 60 60
 Single phase motor loads 120V  1HP 2HP 3HP
240V  1HP 3HP 3HP
Three phase motor loads 240V 5HP 7.5HP
480V 7.5HP 10HP

Additional information

Weight 128 oz
Dimensions 1 × 1 × 1 in
menuchevron-down-circle
100 Amp 3 Pole, 120VAC holding coil mercury displacement relay 3100NO-120A-18
100 Amp 3 Pole, 120VAC holding coil mercury displacement relay 3100NO-120A-18
Original price was: $402.35.Current price is: $388.35.
- +
0
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram