$0.00 0 items

No products in the cart.

55 gallon metal drum immersion heater by Tempco - TAT30006


240V 4000W 55 gal OTS Steel drum heater with 60-250F thermostat. Usually ships NEXT DAY!

Add-ons Cords

A variety of high-quality Primelight® outdoor extension cord products are available and offered as bundles for discounts.Click here for more power cords options


240V 4000W Steel 55 gal OTS drum heater with 60-250F stat with over temperature cut out

  • Voltage: 240V 1PH
  • Wattage: 4KW
  • Dimensions: A=36", B=19"
  • Elements: Steel
  • Watt Density: 32 watts per square inch
  • Application: Lightweight Oil
  • Housing: NEMA 1
  • Availability: Usually ships next day
  • Corrosion Guide
  • Watt Density Guide

Design Features

      • Fits through the standard 2" bung opening in 55 gallon drums
      • Ideal for improving the flow of lard, tar, oils and other high
        viscosity solutions
      • Double Pole 60-250F thermostat with over temperature cutout
        and pilot lamp to indicate heater on/off status
      • Only 8" of vertical riser is heated, allowing liquid level to fluctuate
        without damaging the heater.
      • Adjustable stainless steel mounting bracket.

Optional Features

      • Passivation, electropolished, or bright annealed surface treatments available for Stainless Steel or Incoloy sheath designs.
      • NEMA 4 (moisture resistant) and/or NEMA 7 (explosion resistant)
        terminal enclosures
      • External Power wiring options include flexible cord/plug, armored
        cable, wire braided or plain leadwire.
      • Process or Hi-Limit thermocouple in thermowell in place of the

Installation Instructions

    1. Ensure the vertical heated portion, which extends 8" up riser from bottom of element, is always fully immersed.
    2. Use in metal drums, containers or heat resistant tanks only.
    3. All wiring should be in accordance with NEC/NFPA and local codes.
    4. Use techniques safe for the heater and surrounding environment.
    5. Use mounting brackets to position heater away from tank wall and above sludge buildup at bottom of tank.
    6. Periodically remove the heater to clean residues and inspect for damage.
    7. Warning:Hazard of electric shock. Heater installation must be grounded.
    8. Caution:Heater must be disconnected from power input before servicing or removal.

Additional information

Weight 900 oz
Dimensions 48 × 25 × 8 in
Drum Size

Heater Type

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram