SG8-N 80,000 Btu/Hr natural gas direct spark ignition ceramic infrared heater
|No. of Burners
|Supply Pressure (water column)
- Ignition Type: Direct Spark Ignition
- Supply Voltage: 115 Volt
- Amp Draw: 0.40 amps
- Gas Connection: 1/2" NPT Female
- See Specifications for minimum clearance dimensions
Enhance your indoor heating with the SunStar Ceramic Heater, boasting a powerful 30% to 50% fuel-saving efficiency compared to conventional heating methods. Designed for spot or area heating and total building solutions, this heater features a direct spark ignition and a 115-volt supply, with a low 0.40-amp draw for cost-effective operation.
Experience the warmth of the sun with its ceramic infrared heating, creating a cozy atmosphere at floor level. The aluminized steel construction ensures durability and corrosion-resistance, while the dimpled tile assembly and aluminum reflectors maximize radiant output for optimal heating performance.
With a 100% gas shut-off safety control and an optional protective radiant screen, this compact heater offers seamless setup and reliable operation. Enjoy the convenience of UPS shipping, as each unit requires no assembly and is thoroughly tested before shipment.
Please note, that this heater is suitable for indoor installation only, operating in Unvented mode to ensure efficient performance. Ensure compliance with national codes by providing 4 CFM/1000 BTU of ventilation to dilute combustion products using gravity or mechanical means.
Elevate your heating efficiency with the SunStar Ceramic Heater, backed by a 12-month parts warranty for added peace of mind. Order now for quick 8-10 day delivery.
- Dimpled tile assembly design for increased radiant efficiency
- Design certified for angle mounting up to 30 degrees
- Equipped with 100% gas shut-off safety control
- Constructed of aluminized steel for corrosion-resistance
- Aluminum reflectors designed to maximize radiant output
- Optional protective radiant screen (sold separately)
- Compact size for UPS shipping
- No assembly required
- Heaters are 100% tested prior to shipment
- Manufactures warranty 12 months parts no labor
This heater is for Indoor Installation only and can be used in Unvented mode. The term Unvented actually means Indirect Vented. While the products of combustion are expelled into the building, national codes require 4 CFM/1000 BTU of heater input ventilation in the building to dilute these products of combustion. This ventilation may be provided by gravity or mechanical means.